GENERAL DESCRIPTION The PIC16C62X are 18 and 20 Pin ROM/EPROM-based members of the versatile PICmicro™ family of low-cost, high-performance, CMOS, fully-static, 8-bit microcontrollers. High Performance RISC CPU: • Only 35 instructions to learn • All single-cycle instructions (200 ns), except for program branches which are two-cycle • Operating speed: - DC - 20 MHz clock input - DC - 200 ns instruction cycle • Interrupt capability • 16 special function hardware registers • 8-level deep hardware stack • Direct, Indirect and Relative addressing modes Peripheral Features: • 13 I/O pins with individual direction control • High current sink/source for direct LED drive • Analog comparator module with: - Two analog comparators - Programmable on-chip voltage reference (VREF) module - Programmable input multiplexing from device inputs and internal voltage reference - Comparator outputs can be output signals • Timer0: 8-bit timer/counter with 8-bit programmable prescaler Special Microcontroller Features: • Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Brown-out Reset • Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation • Programmable code protection • Power saving SLEEP mode • Selectable oscillator options • Serial in-circuit programming (via two pins) • Four user programmable ID locations CMOS Technology: • Low-power, high-speed CMOS EPROM technology • Fully static design • Wide operating voltage range - PIC16C62X - 2.5V to 6.0V - PIC16C62XA - 2.5V to 5.5V - PIC16CR620A - 2.0V to 5.5V • Commercial, industrial and extended temperature range • Low power consumption - < 2.0 mA @ 5.0V, 4.0 MHz - 15 µA typical @ 3.0V, 32 kHz - < 1.0 µA typical standby current @ 3.0V
|