1 FEATURES
■ One full bridge for 6A load (ron = 150mΩ )
■ Two half bridges for 3A load (ron = 300mΩ )
■ Two half bridges for 1.5A load (ron = 800mΩ )
■ One highside driver for 6A load (ron = 100mΩ )
■ Four highside drivers for 1.5A load (ron = 800 mΩ )
■ Programmable Softstart function to drive loads
with higher inrush currents (i.e. current
>6A,>3A,>1.5A)
■ Very low current consumption in standby mode
IS < 6µA, typ. Tj ≤ 85 °C)
■ All outputs short circuit protected
■ Current monitor output for 300mΩ ,150mΩ and
100m highside drivers
■ All outputs over temperature protected
■ Open load diagnostic for all outputs
■ Overload diagnostic for all outputs
■ Seperated half bridges for door lock motor
■ PWM control of all outputs
■ Charge Pump output for reverse polarity
protection
2 APPLICATIONS
Door Actuator Driver with bridges for door lock and
safe lock, mirror axis control, mirror fold and highside
driver for mirror defroster and four 5W-light bulbs.
3 DESCRIPTION
The L9950 is a microcontroller driven multifunctional door actuator driver for automotive applications.Up to five DC motors and five grounded
resistive loads can be driven with six half bridges
and five highside drivers. The integrated standard
serial peripheral interface (SPI) controls all operation modes (forward, reverse, brake and high impedance).
All diagnostic informations are available via SPI
|