| Manufacturer | Part # | Datasheet | Description |
TE Connectivity Ltd |
408-10020
|
126Kb/3P |
Extraction/Lance Reset Tool
|
Tyco Electronics |
408-10021
|
530Kb/5P |
The CERTI--CRIMP II Tool Holder Assembly
|
|
408-10029
|
237Kb/9P |
Reasons for reissue are provided in Section 8, REVISION SUMMARY.
|
|
408-10002
|
245Kb/5P |
Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
|
|
408-10004
|
3Mb/9P |
The pneumatic crimping heads consist of integral jaws which close in an arc-like motion
|
|
408-10033
|
205Kb/6P |
Reasons for reissue are provided in Section 8, REVISION SUMMARY.
|
|
408-10034
|
635Kb/5P |
The crimping head consists of integral jaws which close in an arc-like motion.
|
TE Connectivity Ltd |
408-10039
|
434Kb/5P |
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
|
|
408-10040
|
174Kb/7P |
Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
|
Tyco Electronics |
408-10041
|
275Kb/5P |
Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
|
TE Connectivity Ltd |
408-10043
|
292Kb/5P |
SDE-SA Hand Tool
|
Tyco Electronics |
408-10047
|
228Kb/5P |
Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
|
TE Connectivity Ltd |
408-10049
|
81Kb/2P |
Extraction Tool Assembly
|
|
408-10050
|
341Kb/8P |
Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY
|
|
408-10051
|
183Kb/7P |
Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
|
Tyco Electronics |
408-10055
|
113Kb/2P |
Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY
|
|
408-10057
|
86Kb/2P |
Press down evenly on the extraction tool until it bottoms on the chicklet
|
|
408-10058
|
210Kb/3P |
This tooling is for use in Manual Arbor Frame Assemblies that are capable of 3000 pounds of crimp force.
|
|
408-10089
|
412Kb/6P |
These kits were designed for use with the AMPOMATOR System III Lead?밠aking Machine and the AMP?밢?밚ECTRIC Servo Terminator III Machine.
|
|
408-10096
|
511Kb/2P |
Using a 5mm hex wrench, install the mounting bracket on the servo terminator as shown in Figure 2.
|
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand