Manufacturer | Part # | Datasheet | Description |
TE Connectivity Ltd |
408-8895
|
256Kb/2P |
Installation and Cleaning Procedures for Fiber Optic Buildout Attenuators
|
Tyco Electronics |
408-8810
|
208Kb/3P |
Read and understand these instructions before using the seating tool.
|
TE Connectivity Ltd |
408-8812
|
197Kb/4P |
MTA- 50 Mass Termination Tooling
|
408-8821
|
55Kb/2P |
The production cable pointers are hand-fed pointers that use a small diameter cutter to allow ?쐏ointing" of pre-bent cable assemblies.
|
408-8848
|
488Kb/6P |
Reasons for reissue are provided in Section 8, REVISION SUMMARY.
|
408-8851
|
265Kb/3P |
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
|
408-8853
|
137Kb/3P |
Hex Crimping Die
|
408-8878
|
217Kb/4P |
626 Pneumatic Crimping Head 1490191-1 (Used with 626 Pneumatic Tooling Assemblies)
|
Tyco Electronics |
408-8022
|
205Kb/4P |
Read the following instructions carefully before and during the installation of the conversion kits on the machine.
|
TE Connectivity Ltd |
408-8025
|
696Kb/11P |
Printed Circuit (PC) Board Pins and Disconnect Receptacle Contacts
|
408-8039
|
696Kb/11P |
Printed Circuit (PC) Board Pins and Disconnect Receptacle Contacts
|
408-8040
|
252Kb/11P |
Audio/Microphone Connectors
|
408-8040
|
696Kb/11P |
Printed Circuit (PC) Board Pins and Disconnect Receptacle Contacts
|
Tyco Electronics |
408-8053
|
113Kb/3P |
Reasons for reissue of this instruction sheet are provided in Section 4, REVISION SUMMARY.
|
408-8322
|
894Kb/15P |
Reasons for reissue of this document are provided in Section 10, REVISION SUMMARY.
|
408-8339
|
280Kb/2P |
90-Degree Cable Clamp Assembly
|
TE Connectivity Ltd |
408-8340
|
107Kb/3P |
Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
|
Tyco Electronics |
408-8377
|
249Kb/6P |
Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools
|
408-8378
|
245Kb/5P |
Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
|
408-8394
|
107Kb/3P |
Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY.
|